Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Dashboard Display on Citroen Berlingo

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Onboard computer

In this video tutorial, you will learn how to remove the dashboard display on a first-generation Citroen Berlingo, as well as on a Peugeot Partner. First, get inside the car and pry off the sides of the display's plastic cover to remove it. Then, use a T20 Torx screwdriver to unscrew the fixing screws located underneath, as shown in the video. At this point, gently pull out the display and disconnect its electrical connector located at the back; simply replace it and reassemble everything, following the video to the end!

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the display lamp of the Citroen Berlingo
How to change the display lamp of the Citroen Berlingo
Citroen Berlingo (2018-2026 / MK 3) We can see in this video how to change the display lamp of the Citroen Berlingo: with a plastic spatula, we lever on the outer sides of the dashboard…
How to Set the Clock on a Citroen Berlingo
How to Set the Clock on a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Today, let’s discover how to adjust the clock on a Citroen Berlingo, as well as on a Peugeot Partner Tepee, by following the instructions below. Firs…
How to Reset the Service on the Citroen Berlingo Van?
How to Reset the Service on the Citroen Berlingo Van?
Citroen Berlingo (2008-2018 / MK 2) In this tutorial, see how to reset the service on the Citroen Berlingo van, an extremely simple and quick operation to perform only after completing …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos