Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of Remote Key for Battery Replacement

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Key

Each remote contains a small battery that powers the electronic circuit of the transmitter. When this battery runs out, it becomes impossible to open and close the doors remotely. Fortunately, you can access the vehicle using the mechanical key. Replacing the battery is straightforward; use a small tool to pry open the back of the remote to separate the two plastic halves, remove the battery, and replace it with a new one of the same specifications. These batteries are available at any supermarket. If the plastic casing is damaged, it can also be replaced.

Updated on 6 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the battery of a Citroen C4 Picasso key
How to replace the battery of a Citroen C4 Picasso key
Citroen C4 Picasso (2013-2022 / MK 2) The replacement of the battery of a Citroen C4 Picasso key is a very quick operation to be carried out independently, you just need to use a flat-hea…
Replacing Remote Key Battery on Citroen C4 Picasso
Replacing Remote Key Battery on Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) In this video tutorial, you will learn how to disassemble and replace the battery of the remote key for a Citroen C4 Picasso. First, take the remote …
How to Replace the Remote Battery on a Citroën C4 Picasso?
How to Replace the Remote Battery on a Citroën C4 Picasso?
Citroen C4 Picasso (2013-2022 / MK 2) To replace the battery in the Citroën C4 Picasso remote, use a tool like a screwdriver to pry off the plastic cover on the back of the device. Once t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos