Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Glow Plug on Citroen C4 Picasso

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Glow plugs

Lift the bonnet and place the support rod in position. Replacing the glow plugs on this car model is not a complicated process, except that they are quite hidden, and you will need to use a mirror, as shown in the video. The glow plugs are located at the back of the engine, and you can unscrew their fixing screws with simple socket spanners (they should all be 8 or 10 mm). To detach them from their seat once unscrewed, I recommend using a suitable pair of pliers, as it is difficult to do by hand. To fit the new glow plugs, proceed in reverse.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Dismantling the Airbag Switch Module on a Citroen C4 Grand Picasso
Dismantling the Airbag Switch Module on a Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) This guide shows the procedure to dismantle the airbag switch and module on the second series Citroen C4 Grand Picasso. First, get into the vehicle a…
Change the glow plugs on a Citroen C4 Grand Picasso
Change the glow plugs on a Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Changing the glow plugs on a Citroen C4 Grand Picasso? Start by opening the engine bay. Pull the lever to open the engine bay located at the bottom l…
Removing the Front Bumper of a Citroen C4 Picasso
Removing the Front Bumper of a Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Follow these steps to remove the front bumper of a Citroen C4 Picasso. Lift the bonnet and secure it. Using a battery-powered screwdriver or a screwd…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos