Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper of a Citroen C4 Picasso

Model: Citroen C4 Picasso MK 2 - Years 2013-2022
Part: Front bumper

Follow these steps to remove the front bumper of a Citroen C4 Picasso. Lift the bonnet and secure it. Using a battery-powered screwdriver or a screwdriver, unscrew the securing bolts located at the top of the bumper (remove the central front cover). Unscrew the bolts of the wheel arch liners and finally remove the bolts located at the bottom of the bumper (if present). Remove the bumper from the vehicle body. To proceed with the installation, hold the bumper against the vehicle body and screw in all the bolts positioned inside the bumper.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper of the Citroen C4 Picasso
How to Remove the Front Bumper of the Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Today, discover the procedure for removing and replacing the front bumper of the Citroen C4 Picasso. First, open the bonnet of the vehicle and start …
Guide to disassembling the front bumper of the Citroen C4 Grand Picasso
Guide to disassembling the front bumper of the Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Today we will see the main instructions that will allow us to disassemble and remove the front bumper of the Citroen C4 Grand Picasso. First, open th…
How to Remove the Front Bumper on a Citroen C4 Picasso?
Citroen C4 Picasso (2006-2013 / MK 1) In this tutorial, see how to replace the front bumper on a Citroen C4 Picasso, a very simple and quick operation. First, open the bonnet, then locate…

Other guides you may be interested in

    Frequently Asked Questions

    • C4 Picasso 2006-2013 - How do you remove the front bumper of the Citroà «n C4 Picasso? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos