Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Reverse Switch on a Citroen C3

Model: Citroen C3 SC - Years 2009-2016
Part: Reverse light switch

Before starting, open the bonnet of your Citroen C3. Begin by removing the battery cover and the air filter housing by unscrewing the fixing screws and disconnecting the relevant hoses. This will give you access to the reverse switch. Next, disconnect the electrical connector, then unscrew and remove the reverse switch itself to complete the disassembly. To fit the new switch, simply reverse this procedure, and the replacement will be complete.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Citroen C3
How to Replace the Battery in a Citroen C3
Citroen C3 (2002-2009 / FC, FN) How to replace the battery in a Citroen C3? This guide explains how to carry out the battery replacement: open the car door and pull up the engine co…
How to Bleed and Replace the Radiator Fluid on a Citroen C3
How to Bleed and Replace the Radiator Fluid on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) In this video tutorial, you will learn how to bleed and replace the coolant in the radiator of a first-generation Citroen C3, as well as other models…
How to Replace the Rear Light of a Citroën C3
How to Replace the Rear Light of a Citroën C3
Citroen C3 (2009-2016 / SC) Follow this guide to replace the rear light of a Citroën C3 along with the bulbs. Open the boot lid, unscrew the securing nuts at the back of the rea…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos