Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Reverse Switch on Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Checks and maintenance

How to change the reverse switch on a Citroen C3? Enter the cabin; put the gearbox in neutral and proceed to work in the engine bay. Open and lift the bonnet and secure it; remove the air intake hose and the battery terminals. Using a socket wrench, unscrew the pin (as shown in the video) of the reverse switch. Check the functionality of the part (if broken) and replace it. Install the new switch in its housing and reassemble the previously removed parts (air intake hose and battery terminals). Test the correct operation of the part.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen C3 (2009-2016 / SC) Before starting, open the bonnet of your Citroen C3. Begin by removing the battery cover and the air filter housing by unscrewing the fixing screws a…
Citroen C3 (2002-2009 / FC, FN) Note: the stop switch is typically located in a hard-to-reach position. In some car models, it may slightly differ from what is described. In the mod…
Citroen C3 (2009-2016 / SC) Removing the window switch in case of a fault on a Citroen C3 follows a rather simple procedure, which can be done independently, aided by our short …

Other guides you may be interested in

    Frequently Asked Questions

    • C3 2002-2009 - Where is the horn located in the Citroen C3? Read answer
    • C3 2009-2016 - What to do in case of malfunction of the external temperature sensor in the Citroen C3? Read answer
    • C3 2002-2009 - Where is the power steering tank located in the Citroen C3? Read answer
    • C3 2009-2016 - How many reversing lights does the Citroen C3 have? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos