Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Lights on a Citroen DS3

Model: Citroen Ds3 MK 1 - Years 2010-2019
Part: Tail light bulb

Open the boot lid and observe the side wall of the boot, obviously on the side of the affected light: you will notice a plastic grille that you need to remove by hand. This will allow you to access the screw that secures the rear light from behind: unscrew it (a plastic knob has been added to allow you to do this by hand). Disconnect the connector and move to the outside, where you can now remove the light from its housing. Manually separate the casing into two parts to access any bulb. Replace the affected bulb and reassemble the light.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Rear Light on Citroen Ds3
Replacing Rear Light on Citroen Ds3
Citroen Ds3 (2010-2019 / MK 1) Let's see how to replace the rear light on a Citroen Ds3. Open the tailgate to access the rear light, remove the cover on the side of the boot. Unscr…
How to replace the front headlight bulb of the Citroen DS3
How to replace the front headlight bulb of the Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) If one of the bulbs in the front headlight of your Citroen DS3 has suddenly stopped working and you want to find out how to replace it correctly, the…
Replacement of the front suspension of the Citroen DS3.
Replacement of the front suspension of the Citroen DS3.
Citroen Ds3 (2010-2019 / MK 1) Below we will discover all the instructions that will illustrate the procedure for disassembling and replacing the front suspensions and springs of t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos