Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : Replacement air conditioning filter on Citroen C3

Citroen C3 - Video tutorial

Model: Citroen C3 SX, SY - Years 2016-2023
Part: Cabin air filter
Operation: Replacement air conditioning filter on Citroen C3

Open the hood and put on the special support rod. Observing the area near the windscreen you will notice a grille fixed by one or more clips: remove this clip and the aforementioned grille. Below it you will now notice the location of the air conditioning filter: to replace it there is absolutely nothing to do, just take it out and insert the new piece in its place. The only precaution is to pay attention to the direction of insertion of the new filter, making sure that it is mounted in the same way as the removed filter. Reassemble the grille near the windshield.


Posted on 15 January 2024 by ScegliAuto

This video is currently unavailable

Other guides that may interest you

    Frequently Asked Questions

    • C3 2002-2009 - Where is the Citroen C3 cabin air filter located? Read Answer
    • C3 2009-2016 - Where is the cabin filter of the Citroen C3 II? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos