Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Interior Light on a Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Interior dome light bulb

Is the interior light in the boot damaged? Let's see how to remove the light on a Xsara Picasso. Unscrew the securing screws of the cover on the side of the boot. Once removed, lever between the light and the cover panel, pull the light out from the panel, and disconnect the power connector. Remove the bulb holder from inside the light: replace the damaged bulb with a new one (same size and voltage). Push the light back into place until the clips lock into the side plastic, then reconnect the electrical connector. After securing the light, screw the securing screws back in.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Interior Light Bulb on Citroen Xsara Picasso
How to Replace Interior Light Bulb on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Is the interior light not working? Let's see how to remove the bulb from the interior light on a Citroen Xsara Picasso. Lever between the light and t…
Replacing Headlight Bulbs on Citroen Xsara Picasso
Replacing Headlight Bulbs on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Are the front headlight bulbs of your Xsara Picasso blown and need replacing? Here’s how to remove them. Open the front bonnet by pulling the lever l…
How to replace the air filter of the Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Replacing the air filter on a Citroen Xsara Picasso is a simple and quick operation to do independently. To replace the filter, we need to open the f…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos