Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Glow Plugs on a Citroen Jumper

Model: Citroen Jumper MK 1 - Years 1994-2006
Part: Glow plugs

Before you can start, open the front bonnet of your Citroen Jumper. Begin by removing the exhaust manifold by unscrewing and removing the related fixing bolts, then unclip and remove the manifold itself. Next, disconnect the hoses connected to the glow plugs, followed by disconnecting the positive electrical connector. At this point, unscrew and remove the glow plugs, completing the disassembly. To fit the new glow plugs, simply follow these steps in reverse, and you will have finished the replacement.

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Glow Plugs on a Citroen Jumper
How to Replace the Glow Plugs on a Citroen Jumper
Citroen Jumper (1994-2006 / MK 1) This short video tutorial shows the process of removing and replacing the glow plugs on a Citroen Jumper. This task is easy to perform and requires v…
Where is the OBD2 port located on the Citroen Jumper?
Where is the OBD2 port located on the Citroen Jumper?
Citroen Jumper (2006-2014 / MK 2) If you are curious to find out where the OBD2 port is located in your Citroen Jumper, all you need to do is carefully read the steps described in the…
Where are the fuses on board the Citroen Jumper 2?
Where are the fuses on board the Citroen Jumper 2?
Citroen Jumper (2006-2014 / MK 2) The fuses located on board the Citroen Jumper van model 2, which was produced between 2006 and 2014, are situated in a easily accessible position for…

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos