Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Glow Plugs on a Citroen Jumper

Model: Citroen Jumper MK 1 - Years 1994-2006
Part: Glow plugs

This short video tutorial shows the process of removing and replacing the glow plugs on a Citroen Jumper. This task is easy to perform and requires very little time: all you need to remove and change the glow plugs is a simple socket wrench of the correct size. After opening the bonnet of your Citroen Jumper, locate the position of the glow plugs, which will be at the front of the engine bay. Using your socket wrench, unscrew each of the glow plugs and, when they are sufficiently loosened, pull them out by hand. Once all the old glow plugs are removed, insert new ones using the same tool and method.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Glow Plugs on a Citroen Jumper
How to Replace the Glow Plugs on a Citroen Jumper
Citroen Jumper (1994-2006 / MK 1) Before you can start, open the front bonnet of your Citroen Jumper. Begin by removing the exhaust manifold by unscrewing and removing the related fix…
Where are the fuses on board the Citroen Jumper 2?
Where are the fuses on board the Citroen Jumper 2?
Citroen Jumper (2006-2014 / MK 2) The fuses located on board the Citroen Jumper van model 2, which was produced between 2006 and 2014, are situated in a easily accessible position for…
Where is the OBD2 port located on the Citroen Jumper?
Where is the OBD2 port located on the Citroen Jumper?
Citroen Jumper (2006-2014 / MK 2) If you are curious to find out where the OBD2 port is located in your Citroen Jumper, all you need to do is carefully read the steps described in the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos