Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Instrument Cluster on a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Instrument cluster

Using the lower lever, lower the steering wheel as much as possible. Remove the instrument cluster trim by prying in the gaps with a plastic wedge. At this point, unscrew the Torx T20 screws you have just uncovered, as shown in the video. Extract the instrument cluster and disconnect the rear connector. Done! This procedure should be followed whether you want to replace burnt bulbs or if you need to replace the cluster because it is damaged. For reassembly, simply proceed in reverse, screwing in the screws and mounting the plastic.

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the On-Board Computer of a Citroen C3
How to Reset the On-Board Computer of a Citroen C3
Citroen C3 (2009-2016 / SC) What to do if the maintenance light appears on a Citroen C3? Let's see how to reset the light. Turn on the instrument cluster with the appropriate ke…
Reset Service Light on Citroen C3
Reset Service Light on Citroen C3
Citroen C3 (2002-2009 / FC, FN) Let's see how to reset the maintenance light on a Citroen C3. Turn on the instrument cluster with the dedicated key, then you will see the maintenanc…
Reset Service on Citroen C3
Reset Service on Citroen C3
Citroen C3 (2009-2016 / SC) Do you want to reset the maintenance light on your car? Let's see how to reset the light on a Citroen C3. Turn on the ignition with the key (you will…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos