Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Console on Citroen C5 MK2

Model: Citroen C5 MK 2, RD, X7 - Years 2008-2017
Part: Center console tunnel

Today, you will see the instructions to remove the centre console on a Citroen C5 second series, model X7. First, get into the vehicle and start by removing the gear lever gaiter, detaching it and pulling it upwards; then, pry the sides with something thin to release the upper part of the console, removing the glove compartment as shown in the video. At this point, pull the entire console upwards to remove it, being careful not to damage it; now you can refit everything by applying the reverse procedure of disassembly!

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the door panel of the Citroen C5
How to disassemble the door panel of the Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) Removing the door panel of the Citroen C5 is a very simple operation to perform independently. To perform this operation, we must open the indicated …
How to Remove and Replace the Radio Display of the Citroen C5
How to Remove and Replace the Radio Display of the Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) Today, we will discover the instructions to remove and replace the central display of the radio in the Citroen C5 in simple steps. First, get into th…
How to Replace the Timing Belt on the Citroën C5
How to Replace the Timing Belt on the Citroën C5
Citroen C5 (2008-2017 / MK 2, RD, X7) To replace the timing belt on the Citroën C5, first, remove the bolts securing the front right wheel of the car so that it can be taken off along wit…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos