Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the diesel filter on the Citroen DS3 1.6 HDI

Model: Citroen Ds3 MK 1 - Years 2010-2019
Part: Diesel fuel filter

In this video tutorial we will see how to remove and replace the diesel filter on Citroen DS3 1.6 HDI, following these simple steps. First of all we open the bonnet of our car and we go to identify the diesel filter, which we find on the upper left part of the air filter box; then we go to disconnect the diesel pipes and its electrical connector, as shown in the video. At this point we unscrew the upper cap of the filter, using a socket wrench; once removed we can extract the diesel filter cartridge, replacing it with the new one.

Posted on 23 September 2021 by ScegliAuto

Video tutorial

Related tutorials

Replacing the diesel filter on Ds3
Replacing the diesel filter on Ds3
Citroen Ds3 (2010-2019 / MK 1) Replacing the diesel filter on an Ss3? We disassemble the filter and all its parts. We raise the front hood of the engine, we identify the diesel fil…
How to top up the wax fluid on the Citroen DS3 1.6 HDI
How to top up the wax fluid on the Citroen DS3 1.6 HDI
Citroen Ds3 (2010-2019 / MK 1) In this video tutorial we will see the instructions that will allow us to top up the wax fluid for the particulate filter on the Citroen DS3 1.6 HDI,…
How to change the diesel fuel filter on the Citroen DS3 HDi
How to change the diesel fuel filter on the Citroen DS3 HDi
Citroen Ds3 (2010-2019 / MK 1) In this video we can see how to change the diesel filter on a Citroen DS 3: we access the filter from underneath the car, so we will need to lift it …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos