Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up the AdBlue Fluid on the Citroen DS3 1.6 HDI

Model: Citroen Ds3 MK 1 - Years 2010-2019

In this video tutorial, you will find instructions to top up the AdBlue fluid for the diesel particulate filter on the Citroen DS3 1.6 HDI, as well as on all other models from the Citroen and Peugeot group with the same engine featuring a DPF. To top up the AdBlue fluid, use a nozzle to insert into the designated valve to fill the reservoir; this will neutralise some pollutants and regenerate the particulate filter. Finally, reset the warning light that appears on the dashboard!

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Top Up AdBlue in a Citroen DS3?
How to Top Up AdBlue in a Citroen DS3?
Citroen Ds3 (2010-2019 / MK 1) This tutorial explains how to top up AdBlue in a Citroen DS3, a very simple operation similar to refuelling and to be done when the relevant warning …
Replacing the Diesel Filter on the Citroen DS3 1.6 HDI
Replacing the Diesel Filter on the Citroen DS3 1.6 HDI
Citroen Ds3 (2010-2019 / MK 1) In this video tutorial, you will learn how to remove and replace the diesel filter on the Citroen DS3 1.6 HDI by following these simple steps. First,…
Where is the OBD2 port located in the Citroen DS3?
Where is the OBD2 port located in the Citroen DS3?
Citroen Ds3 (2010-2019 / MK 1) To easily locate the OBD2 port inside your Citroen DS3, you need to carefully follow the steps described below and apply them step by step. First of …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos