Do it yourself
Frequently asked questions about cars and motorcycles

How to Top Up AdBlue in a Citroen DS3?

Model: Citroen Ds3 MK 1 - Years 2010-2019
Part: AdBlue warning light

This tutorial explains how to top up AdBlue in a Citroen DS3, a very simple operation similar to refuelling and to be done when the relevant warning light appears on the dashboard. First, go to the rear of the vehicle and open the boot lid. Then, lift the floor panel and unscrew the cap of the tank located to the left of the spare wheel. Next, insert the nozzle of the canister into the opening and add the necessary amount of fluid to reach the maximum level. Finally, start the vehicle and drive a few miles to ensure proper operation.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen Ds3 (2010-2019 / MK 1) In this video tutorial, you will find instructions to top up the AdBlue fluid for the diesel particulate filter on the Citroen DS3 1.6 HDI, as well a…
Citroen Ds3 (2010-2019 / MK 1) If one of the bulbs in the front headlight of your Citroen DS3 has suddenly stopped working and you want to find out how to replace it correctly, the…
Citroen Ds3 (2010-2019 / MK 1) To carry out the replacement of the battery located in the key of your Citroen DS3, you only need a new CR2032 battery and a flat screwdriver prefera…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos