Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter in a Citroen DS3?

Model: Citroen Ds3 MK 1 - Years 2010-2019
Part: Diesel fuel filter

In this video tutorial, see how to replace the fuel filter in a Citroen DS3. This is a simple operation, but it requires caution as these are delicate components. First, remove the engine cover and disconnect the rear connector using a screwdriver. Remove the three hoses by pressing the respective clips with the screwdriver. Next, unscrew the two rear bolts of 8mm and extract the support. The filter is held in place by 3 Torx screws; unscrew them and rotate the central connector counterclockwise, which will unlock the lower drainage hole. Install the new filter onto the support and reinsert it into the engine bay, connecting the 3 hoses, the connector, and screwing in the two bolts. Remember to clean up any fuel residue thoroughly.

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Diesel Filter on the Citroen DS3 1.6 HDI
Replacing the Diesel Filter on the Citroen DS3 1.6 HDI
Citroen Ds3 (2010-2019 / MK 1) In this video tutorial, you will learn how to remove and replace the diesel filter on the Citroen DS3 1.6 HDI by following these simple steps. First,…
Where is the Fuel Filter Located on the Citroen DS3 and How to Replace It?
Where is the Fuel Filter Located on the Citroen DS3 and How to Replace It?
Citroen Ds3 (2010-2019 / MK 1) In this video, see where the fuel filter is located on the Citroen DS3 and how to replace it, a very simple and cost-effective operation. As shown, i…
Replacing the Diesel Filter on a DS3
Replacing the Diesel Filter on a DS3
Citroen Ds3 (2010-2019 / MK 1) Replacing the diesel filter on a DS3? Remove the filter and all its parts. Lift the front engine cover and locate the diesel filter as shown in the v…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos