Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Auxiliary Belt on a Citroen Berlingo

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: V-belt

Before you start, for easier access, remove the front right wheel. Once the front right wheel is removed, you will have access to the inner wheel arch cover, which you need to remove by unscrewing the two screws that hold it in place. After removing the inner cover, you will have access to the auxiliary belt. Next, loosen the tensioner to slacken the belt. Once it is slack, you can remove it without any issues. To fit the new auxiliary belt, simply follow the steps in reverse, and you will have successfully completed the replacement and reassembly.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Belt on the Citroen Berlingo
How to Replace the Timing Belt on the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Today, you will replace the timing belt on the Citroen Berlingo produced between 2008 and 2016 by following the steps shown in the video. Before star…
How to replace the drive belt on a Citroen Berlingo
How to replace the drive belt on a Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) In this video we can see how to replace the service belt on a Citroen Berlingo MK1: we will need to lift the vehicle, and remove the engine protectio…
When and How to Change the Timing Belt on a Citroen Berlingo
When and How to Change the Timing Belt on a Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Below are the details on when and how to replace the timing belt on a Citroen Berlingo; for the 1.6 HDI engine, the manufacturer recommends replacing…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos