Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Berlingo
    4. : How to replace the timing belt on Citroen Berlingo 1.6 HDI

Citroen Berlingo - Video tutorial

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Timing belt
Operation: How to replace the timing belt on Citroen Berlingo 1.6 HDI

In this video tutorial we will see how to replace the timing belt on the second series Citroen Berlingo, but also on the Peugeot Boxer, with 1.6 HDI 8 valve engine. First we lift the car and remove the right front wheel and the wheel arch; then we are going to remove the V-belt and then lift the engine with a jack. At this point we unscrew the bolts of the engine support, in order to remove it; then we remove the timing cover and disassemble the crankshaft pulley. We then perform the belt disassembly and replacement steps, following the video to the end!


Posted on 11 March 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Berlingo 2008-2018 - How many kilometers does the Citroen Berlingo timing belt need to be replaced? Read Answer
    • Berlingo 1996-2013 - How many km do you need to replace the distribution of the Citroen Berlingo diesel? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos