Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Berlingo
    4. : How do you replace the timing belt on the Citroà «n Berlingo?

Citroen Berlingo - Video tutorial

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Timing belt
Operation: How do you replace the timing belt on the Citroà «n Berlingo?

In order to replace the Citroà «n Berlingo timing belt, the vehicle must be lifted using a bridge or a jack; in this way, it will be possible to unscrew the bolts that secure the front right wheel and the internal cover of the relative wheel arch. Once this has been removed, it will be possible to access the pulleys below, especially the tensioning roller. Its center pin will need to be loosened, as well as the pins of the other pulleys, accessible from the engine compartment. Once the pulleys have been loosened, it will be possible to remove the timing belt and replace it with a new spare part.


Posted on 18 June 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Berlingo 2008-2018 - How many kilometers does the Citroen Berlingo timing belt need to be replaced? Read Answer
    • Berlingo 1996-2013 - How many km do you need to replace the distribution of the Citroen Berlingo diesel? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos