Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How do you replace the battery in the Citroà «n C3?

Citroen C3 - Video tutorial

Model: Citroen C3 FN, FC - Years 2002-2009
Part: Battery
Operation: How do you replace the battery in the Citroà «n C3?

To replace the Citroà «n C3 battery it is necessary to open the hood in order to have access to the engine compartment: the battery will be located under its cover, near the left headlight. To be able to remove it, it will be necessary to lift the cover and disconnect the terminals connected to the battery. Once the cables have been disconnected, the bolts securing the battery inside its housing can be loosened and the battery removed. Now, you will be able to install the new battery, which will have to be properly covered with its cover, fixed with the bolts and connected to its cables.


Posted on 22 March 2024 by ScegliAuto

    Frequently Asked Questions

    • C3 2016-2023 - How do you remove the power battery in the Citroen C3? Read Answer
    • C3 2009-2016 - What is the price for changing the battery on the Citroen C3? Read Answer
    • C3 2016-2023 - Where is the negative pole of the battery located in a Citroen C3? Read Answer
    • C3 2016-2023 - Battery location on Citroen C3? Read Answer
    • C3 2002-2009 - Where is the battery located on a Citroen C3? Read Answer
    • C3 2002-2009 - How many amps must the battery have for the Citroen C3? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos