Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light on a Citroen Jumper

Model: Citroen Jumper MK 1 - Years 1994-2006
Part: Tail light

Today, I will explain how to change the rear light or one of the bulbs contained within it. Unscrew the lower and upper screws that secure the light to the van's frame. With a bit of force, or by using a plastic lever, detach the light from the frame. Disconnect the connector as shown in the video. Now unscrew the screws that hold the bulb holder to the rest of the light assembly. At this point, it will be easy for you to unscrew the burnt bulb and insert the new one you purchased. Refit the bulb holder and screw it in, then reattach the light by connecting the connector and replacing the last two screws.

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Light of a Citroen Jumper
Removing the Rear Light of a Citroen Jumper
Citroen Jumper (1994-2006 / MK 1) In this video, you will learn how to remove the rear light of the practical Citroen Jumper and replace the bulb. First, unscrew the two screws locate…
Replacing the Wing Mirror on the Citroen Jumper
Citroen Jumper (2014-2024 / MK 3) Want to remove the mirror from inside the wing mirror? Here’s how to remove the mirror from the Citroen Jumper. Leverage between the perimeter of the…
Fuse Box Diagram for the Peugeot Jumper
Fuse Box Diagram for the Peugeot Jumper
Citroen Jumper (2014-2024 / MK 3) The main fuse box on this vehicle is located at the bottom of the door pillar on the passenger side. Inside this box are the main fuses, including th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos