Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Light of a Citroen Jumper

Model: Citroen Jumper MK 1 - Years 1994-2006
Part: Tail light

In this video, you will learn how to remove the rear light of the practical Citroen Jumper and replace the bulb. First, unscrew the two screws located on the outside that hold the light in place: now remove the light unit carefully to avoid breaking it. Once this is done, disconnect the light connector and remove the other two screws to access the bulbs: the bulb holder with its bulbs will come out directly. It is recommended to use high-quality bulbs. At this point, replace them and reassemble everything by applying the reverse procedure.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Light on a Citroen Jumper
Replacing the Rear Light on a Citroen Jumper
Citroen Jumper (1994-2006 / MK 1) Today, I will explain how to change the rear light or one of the bulbs contained within it. Unscrew the lower and upper screws that secure the light …
Removing the Radio from a Citroen Jumper
Removing the Radio from a Citroen Jumper
Citroen Jumper (1994-2006 / MK 1) Insert the release keys into the holes on the plastic trim of the stereo, then pull the stereo towards you as shown in the video. Carefully extract t…
Fuse Box Diagram for the Peugeot Jumper
Fuse Box Diagram for the Peugeot Jumper
Citroen Jumper (2014-2024 / MK 3) The main fuse box on this vehicle is located at the bottom of the door pillar on the passenger side. Inside this box are the main fuses, including th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos