Do it yourself
Frequently asked questions about cars and motorcycles

Citroen C4 Picasso battery removal instructions

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Battery

In this video we will see how to remove and replace the battery of a Citroen C4 Picasso first series, following these simple instructions. First we open and lift the bonnet; then we are going to remove the cover of the positive pole, unhooking the lever, pulling upwards. At this point we remove the power cables that run through the battery and remove the upper control unit, unscrewing the nuts with a socket wrench; then we remove the side plate and unscrew the fixing bolt of the battery bracket, which we find at the bottom. We just have to remove and replace the battery!


Posted on 29 March 2024 by ScegliAuto



How to replace the battery in the Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) In today's video we see how to remove the service battery in the Citroen C4 Picasso. This tutorial also applies to the largest model of the French MP
How to disassemble the rear door of the Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Today we will see the instructions that will allow us to disassemble and replace the rear door of the Citroen C4 Picasso. First of all, we open the f
Where is the fuse box of the Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) If you need to intervene directly on one or more fuses of your Citroen C4 Picasso but you do not know where the box that contains them is located, al

Other guides that may interest you

    Frequently Asked Questions

    • C4 Picasso 2013-2022 - What does Active Energy Saving Mode mean on Citroen C4 Picasso? Read Answer

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos