Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the External Door Handle of the Citroen Berlingo

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Handle

This guide outlines the main steps to remove and replace the external door handle of the Citroen Berlingo. First, open the front door and keep the handle open; then use a drill bit to grind down the fixing rivets until you can remove it, as shown in the video. Next, disconnect the cable and the handle opening mechanism, and replace it with the new one; insert it back in place and reconnect the opening cable, applying the reverse procedure for reassembly!

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Handle of the Citroen Berlingo
How to Remove the Handle of the Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) How do you remove the rear handle of the Citroen Berlingo? Start by opening the tailgate. Remove the cover panel at the rear of the tailgate to acces…
How to replace the handle of the sliding door of the Citroen Berlingo
How to replace the handle of the sliding door of the Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Today's instructions will show us how to disassemble and replace the external door handle of the Citroen Berlingo. First, we get into the car and sta…
Removing the Front Door Panel of a Citroen Berlingo
Removing the Front Door Panel of a Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Remove the front door panel of a Citroen Berlingo. Use a trim tool to remove the plastic cover of the handle; unscrew the screws located in the handl…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos