Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Door Panel of a Citroen Berlingo

Model: Citroen Berlingo MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Door trim panel

See other generations:
Video tutorial

Remove the front door panel of a Citroen Berlingo. Use a trim tool to remove the plastic cover of the handle; unscrew the screws located in the handle.

Remove the manual window winding handle, unscrew the remaining screws on the door panel, and detach the securing clips. Finally, pull the panel off by hand and detach it from the door (release the various locking clips and the door opening cable).

Perform the desired maintenance inside the door and reattach the cover panel.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

Removing the Front Door Panel of the Citroen Berlingo - Peugeot Partner Tepee
Removing the Front Door Panel of the Citroen Berlingo - Peugeot Partner Tepee
Citroen Berlingo (2008-2018 / MK 2) The following steps will show you how to remove and replace the front door panel of the Citroen Berlingo, as well as the Peugeot Partner Tepee. First…
How to Remove the Front Door Panel of the Citroen Berlingo
How to Remove the Front Door Panel of the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Today, this guide shows how to remove and replace the front door panel of the Citroen Berlingo, following the instructions below. First, open the fro…
How to Remove the Door Panel of the Citroen Berlingo
How to Remove the Door Panel of the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) This guide illustrates the procedure for removing and replacing the door panel of the Citroen Berlingo, as well as the Peugeot Partner. First, open t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos