Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery in the Citroen C3 1.4 HDI

Model: Citroen C3 SC - Years 2009-2016
Part: Battery

In this brief and simple guide, see how to remove and replace the battery in the Citroen C3 with a 1.4 HDI engine. First, open the bonnet and start by removing the top part of the battery, disconnecting the wiring; use a 12 mm socket spanner for this. Next, disconnect the two battery terminals (positive and negative) and unscrew the fixing bracket screw located at the bottom; lift and remove the battery, replacing it with a new one (with the same amperage), following the video tutorial to the end!

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Thermostat on the Citroen C3 1.4 HDI
Replacing the Thermostat on the Citroen C3 1.4 HDI
Citroen C3 (2009-2016 / SC) This guide shows you how to remove and replace the coolant thermostat on the Citroen C3 1.4 HDI. First, open the bonnet and start by removing the bat…
How to replace the battery of the Citroen C3 1.4 HDi
How to replace the battery of the Citroen C3 1.4 HDi
Citroen C3 (2009-2016 / SC) Today we will discover the instructions that will allow us to disassemble and replace the battery of the Citroen C3 1.4 HDi. First, let's open the ca…
Replacing the Temperature Sensor on the Citroen C3 1.4 HDI
Replacing the Temperature Sensor on the Citroen C3 1.4 HDI
Citroen C3 (2002-2009 / FC, FN) Let’s discover the steps necessary to remove and replace the coolant temperature sensor on the first-generation Citroen C3 with a 1.4 HDI engine. Fir…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos