Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil service on the Citroen Jumper?

Model: Citroen Jumper MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, you will see how to reset the oil service on the Citroen Jumper, a very simple and quick operation. Before proceeding, ensure you have completed the oil change and replaced the filter.

Start by inserting the key but leave it in the initial position, then press the brake and accelerator pedals fully down. After at least 15 seconds, turn on the ignition while maintaining pressure until the confirmation message appears.

Finally, switch off the ignition, release the pedals, and turn it on again, checking that the procedure has been completed correctly.


Updated on 14 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light in the Citroen Jumper Van?
How to Reset the Service Light in the Citroen Jumper Van?
Citroen Jumper (2014-2024 / MK 3) In this tutorial, see how to reset the service light in the Citroen Jumper van, a very simple and quick operation to be carried out only after comple…
How to reset the service light in the Citroen Jumper van?
How to reset the service light in the Citroen Jumper van?
Citroen Jumper (2014-2024 / MK 3) In this tutorial we can see how to reset the service in the Citroen Jumper van, an extremely simple and quick operation, to be carried out only once …
How to reset the service in the Citroen Jumper van?
How to reset the service in the Citroen Jumper van?
Citroen Jumper (2014-2024 / MK 3) In this tutorial we can see how to reset the service in the Citroen Jumper van, an extremely simple and quick operation, to be carried out only once …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos