Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlamp Bulbs on the Citroen C3

Model: Citroen C3 SC - Years 2009-2016
Part: Headlight bulb

In this tutorial, see how to replace the headlamp bulbs on the Citroen C3, a very simple and quick operation. First, ensure the key is not inserted, then open the engine bonnet, remove the large rubber cap at the back of the headlamp, and disconnect the power connector. Next, extract the old bulb by releasing the metal clip and install the replacement bulb by following the reverse procedure. The operation is identical for both dipped and main beam lights. Avoid touching the new bulbs with bare hands to prevent leaving residues that can cause overheating.

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlight Bulb on Citroen C3
Replacing Front Headlight Bulb on Citroen C3
Citroen C3 (2002-2009 / FC, FN) Replace the blown bulbs in the front headlight of a Citroen C3. Open the front bonnet and secure it. Remove the plastic cover to access the front hea…
How to Replace the Headlight Bulbs on a Citroen C3
How to Replace the Headlight Bulbs on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) Let’s see how to replace the bulbs fitted in the front headlight of a Citroen C3. Open the front bonnet and (pulling the lever located at the bottom …
How to Change the Front Headlight Bulbs on a Citroen C3
How to Change the Front Headlight Bulbs on a Citroen C3
Citroen C3 (2009-2016 / SC) Learn how to change the front headlight bulbs on a Citroen C3. Open the front bonnet by pulling the lever located at the bottom right of the dashboar…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos