Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Radio of the Citroen Berlingo

Model: Citroen Berlingo MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Warning light – error code

See other generations:
Video tutorial

If you encounter malfunctions with the radio and multimedia system of this vehicle, you can perform a reset by following the instructions provided below and using the images from the video. First, access the driver's seat and turn on the ignition.

Locate the "plus" and "minus" volume adjustment buttons on the radio, press and hold them simultaneously for at least ten seconds until the multimedia system display turns off and automatically restarts after the reset.


Updated on 22 May 2026 by ScegliAuto


Related tutorials

How to remove the radio from a Citroen Berlingo
How to remove the radio from a Citroen Berlingo
Citroen Berlingo (2018-2026 / MK 3) Follow these brief and simple instructions to remove and replace the standard radio in a Citroen Berlingo. First, get into the vehicle and start by p…
How to Replace the Radio in a Citroën Berlingo?
How to Replace the Radio in a Citroën Berlingo?
Citroen Berlingo (2018-2026 / MK 3) To replace the radio in a Citroën Berlingo, use a tool to pry off the upper part of the central dashboard panel, disconnecting the connectors as well…
How to reset the TPMS light on the Citroen Berlingo
How to reset the TPMS light on the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) The TPMS warning light reset on the Citroen Berlingo must be followed after adjusting the tire pressure. We then use the air compressor to inflate th…

    Frequently Asked Questions

    • Berlingo 2008-2018 - How to reset the radio of the Citroen Berlingo? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos