Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the number plate bulb on the Citroen Berlingo MK1

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: License plate light

Today, we will see the main steps to remove and replace the number plate bulb on the first series Citroen Berlingo from 2004. First, remove the small plastic cover of the bulb by prying it open with something thin at the slot found on the side; then extract the bulb inside, as shown in the video. At this point, replace the bulb with a new one, pushing and inserting it correctly between the contacts; reassemble the plastic cover and perform the same operation for the other number plate bulb!

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Number Plate Light on Citroen Berlingo
How to Replace the Number Plate Light on Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Follow this guide to replace the damaged bulb of the number plate light on a Citroen Berlingo. Use a screwdriver or plastic lever to remove the numbe…
Replacing Number Plate Light on Citroen Berlingo
Replacing Number Plate Light on Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Are the number plate bulbs on your Citroen Berlingo damaged? Here's how to replace them. Using a screwdriver, remove the transparent light unit for t…
How to replace the license plate light of the Citroen Berlingo
How to replace the license plate light of the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) In the following article, we will explain how to replace the license plate light of the Citroen Berlingo. For this operation, a flathead screwdriver …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos