Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Number Plate Light on Citroen Berlingo

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: License plate light

Are the number plate bulbs on your Citroen Berlingo damaged? Here's how to replace them. Using a screwdriver, remove the transparent light unit for the number plate located on the rear hatch of the car. Once the light unit is removed, detach the transparent plastic and extract the bulb inside. Fit the new bulb (same size and voltage), insert it into the bulb holder, and refit the light unit into the hatch panel, pressing until the clips lock automatically. Check if the lights work (turn them on using the controls).

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Number Plate Light on the Citroen Berlingo
How to Replace the Number Plate Light on the Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) If you own a Citroen Berlingo and want to learn how to correctly replace the number plate light, follow the steps described in this guide. First, go …
How to Replace the Number Plate Light on Citroen Berlingo
How to Replace the Number Plate Light on Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Follow this guide to replace the damaged bulb of the number plate light on a Citroen Berlingo. Use a screwdriver or plastic lever to remove the numbe…
How to replace the license plate light of the Citroen Berlingo
How to replace the license plate light of the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) In the following article, we will explain how to replace the license plate light of the Citroen Berlingo. For this operation, a flathead screwdriver …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos