Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Light on the Citroen Berlingo

Model: Citroen Berlingo MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: License plate light

See other generations:
Video tutorial

If you own a Citroen Berlingo and want to learn how to correctly replace the number plate light, follow the steps described in this guide. First, go to the rear hatch of the vehicle and fully lift it. Next, remove the small light unit for the number plate and disconnect the electrical cable attached to it. Once done, proceed with replacing the faulty bulb.

Finally, reconnect the electrical cable to the light unit and reassemble it correctly.


Updated on 7 September 2026 by ScegliAuto


Related tutorials

How to Replace the Horn on the Citroën Berlingo?
How to Replace the Horn on the Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) To replace the horn on the Citroën Berlingo, lift the vehicle so you can loosen the screws securing the left front wheel, completely removing it. Onc…
How to Replace the Clutch on Citroën Berlingo?
How to Replace the Clutch on Citroën Berlingo?
Citroen Berlingo (1996-2013 / MK 1) You can perform the clutch replacement operation on the Citroën Berlingo by lifting the vehicle so that the front wheels are off the ground: once lif…
How to Replace the Rear Light Bulb on a Citroën Berlingo?
How to Replace the Rear Light Bulb on a Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) You can replace the rear light bulb on a Citroën Berlingo by opening the tailgate to locate the bulb next to the light in question. This must be free…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos