Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Panel of the Citroën Berlingo Dashboard?

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: A/C controls

To replace the centre panel with the climate control buttons on the Citroën Berlingo, disconnect the part located at the base of the leather gear knob. Next, remove the panel located beneath the climate control buttons to access the screws underneath. Once these screws are removed, you can also loosen those under the gear knob to detach all the controls and disconnect their connectors at the back. The new replacement parts must then be connected to the connectors and secured in their housings with the appropriate screws.

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the central panel of the Citroen Berlingo
How to remove the central panel of the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Today we will explain how to remove the central panel of the Citroen Berlingo dashboard. To remove the panel, we must first unhook the upper and lowe…
Guide to Removing the Heater Radiator of the Citroen Berlingo
Guide to Removing the Heater Radiator of the Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) This guide provides the main instructions on how to remove and replace the heater radiator of the Citroen Berlingo's cabin. First, get inside the veh…
How do you reset the tire pressure indicator light on the Citroën Berlingo?
How do you reset the tire pressure indicator light on the Citroën Berlingo?
Citroen Berlingo (2018-2026 / MK 3) To reset the tire pressure warning light on the instrument panel of the Citroën Berlingo, you will need to turn the key inside the ignition switch so…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos