Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Intake Manifold Gasket Replacement

Model: Citroen C4 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Engine

See other generations:
Video tutorial

The intake manifold has four gaskets (one for each cylinder), which are square-section O-rings. Once the manifold is removed and the old gaskets are taken off, clean the gasket seats thoroughly and insert the new rings, ensuring they fit properly in their respective seats (they will take on a triangular shape).

After this operation, install the manifold, ensuring to tighten with the correct torque and fixing nuts to guarantee a perfect seal and avoid any venting issues or pressure loss.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Exhaust Manifold Gasket Replacement
Exhaust Manifold Gasket Replacement
Citroen C4 (2004-2010 / MK 1) In the following video tutorial, new exhaust manifold gaskets are fitted to a Citroen C4. The exhaust manifold is the part of the engine that connect…
Replacement of Rocker Cover Gasket
Replacement of Rocker Cover Gasket
Citroen C4 (2004-2010 / MK 1) The gasket kit for engine regeneration always includes the rocker cover gasket; in this case, the vehicle has two covers and two gaskets. After thoro…
Replacing Complete Engine Gasket Set
Replacing Complete Engine Gasket Set
Citroen C4 (2004-2010 / MK 1) As usual, check the flatness of the surface. Now, using the appropriate tool, remove the valve and replace the valve guide ring. This operation shoul…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos