Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radiator Fan Control Module in the Citroën C4 Grand Picasso?

Model: Citroen C4 Picasso MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, you will see how to remove and then replace the radiator fan control module in the Citroën C4 Grand Picasso, an operation to perform if the fan shows signs of malfunction. First, wait for the engine to cool down, then open the bonnet and remove the upper front cover by taking out the respective plastic clips.

Next, locate the module on your right, remove the cover, and unscrew the single bolt with a Torx screwdriver. At this point, you can disconnect the connector and fit the replacement by following the reverse procedure.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

Removing the Cabin Fan from a Citroen C4 Grand Picasso
Removing the Cabin Fan from a Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) This guide outlines the main steps for removing and replacing the cabin fan in the Citroen C4 Picasso and Grand Picasso. First, get into the vehicle …
Dismantling the Airbag Switch Module on a Citroen C4 Grand Picasso
Dismantling the Airbag Switch Module on a Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) This guide shows the procedure to dismantle the airbag switch and module on the second series Citroen C4 Grand Picasso. First, get into the vehicle a…
Replacement of the cabin heater radiator of the Citroen C4 Grand Picasso.
Replacement of the cabin heater radiator of the Citroen C4 Grand Picasso.
Citroen C4 Picasso (2013-2022 / MK 2) The following steps will show us how to disassemble and replace the heater radiator of the Citroen C4 Grand Picasso, for example in case of leakage. …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos