Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Brake Caliper Cleaning and Lubrication

Model: Citroen C4 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Brake rotors

See other generations:
Video tutorial

Oxidation and dust contamination of the brakes can cause the floating system of the brake caliper to seize, preventing proper release after braking; to check this situation, position the vehicle on suitable axle stands and remove the front wheel: if the disc does not rotate freely by hand, action is required.

Remove the brake caliper, extract the pads, remove the sliding plates and the fastening pins complete with rubbers; clean the caliper support with appropriate spray and a metal brush, lubricate the pins and sliding plates, and reinstall the pads and caliper: at this point, you will notice that the pads retract more easily and the disc rotates freely.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads on a Citroen C4
How to Replace the Rear Brake Pads on a Citroen C4
Citroen C4 (2004-2010 / MK 1) Before starting, lift the rear side of your Citroen C4. Begin by removing the rear wheel by unscrewing the fixing bolts. Next, unscrew and remove the…
How to Replace the Front Brake Pads on a Citroen C4
How to Replace the Front Brake Pads on a Citroen C4
Citroen C4 (2004-2010 / MK 1) In this tutorial, you will learn how to replace the front brake pads on a Citroen C4. First, turn off the car, pull the handbrake, and open the bonne…
Replacing Brake Pads and Disc on Citroen C4
Replacing Brake Pads and Disc on Citroen C4
Citroen C4 (2010-2018 / MK 2) Replacing the brake disc and pads on a Citroen C4. Let's see how to disassemble the parts. Lift the car on a column lift to the desired height, remov…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos