Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Instrument Cluster from the Citroën C3 Picasso?

Model: Citroen C3 Picasso MK 1 - Years 2008-2017
Part: Instrument cluster

To remove the instrument cluster from the Citroën C3 Picasso, first loosen the two screws located at the back of the plastic cover of the cluster. Once these screws are loosened, the instrument cluster can be pulled out, and you will need to disconnect the connectors at its bottom. After the cluster is freed, connect the new replacement part, positioning it in the centre of the dashboard. Finally, secure the unit using the appropriate screws that must be inserted at its back.

Updated on 7 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Citroen C3 Picasso (2008-2017 / MK 1) Below we will see the instructions that will allow us to disassemble and replace the instrument panel and display of the Citroen C3 Picasso. First, w…
Citroen C3 Picasso (2008-2017 / MK 1) Before starting, open the tailgate of your Citroen C3 Picasso. Begin by unscrewing and removing the screws that secure the rear light to its housing.…
Citroen C3 Picasso (2008-2017 / MK 1) To reset the Service light on a Citroën C3 Picasso, press and hold the 0.0 button located at the bottom right of the instrument cluster. While holdin…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos