Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Lights in the Citroen C3?

Model: Citroen C3 SY, SX - Years 2016-2023
Part: Tail light

In this tutorial, you can see how to remove the rear lights in the Citroen C3, a very simple operation to perform if you need to replace a bulb or the entire unit. First, ensure the key is not in the ignition, then open the tailgate, remove the cover located at the back of the light to be removed, and disconnect the power connector. Next, unscrew the single plastic fixing bolt, grasp the light unit, and disengage it from the bodywork. To access the bulbs, simply unlock the 4 clips indicated.

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Lights on a 2006 Citroen C3
How to Replace the Rear Lights on a 2006 Citroen C3
Citroen C3 (2002-2009 / FC, FN) Today, you will learn how to replace the rear lights on a 2006 Citroen C3 model I. To carry out the replacement of the lights, open the rear hatch an…
How to Replace the Rear Lights on a Citroen C3?
How to Replace the Rear Lights on a Citroen C3?
Citroen C3 (2002-2009 / FC, FN) In this tutorial, you will see how to replace the rear lights on a Citroen C3, a very simple and quick operation. Before doing this, ensure that the …
How to Remove the Rear Bumper of a Citroen C3
How to Remove the Rear Bumper of a Citroen C3
Citroen C3 (2002-2009 / FC, FN) How do you remove the rear bumper of a Citroen C3? Follow these steps: using a screwdriver or battery-powered drill, unscrew the securing pins locate…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos