Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Lights on a Citroen C3?

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Tail light

In this tutorial, you will see how to replace the rear lights on a Citroen C3, a very simple and quick operation. Before doing this, ensure that the key is not inserted for safety. Start by opening the boot, then locate the two bolts on the inner edge of the light unit and remove them. Next, grasp the light unit, pull it towards you, and detach it from the bodywork. At this point, disconnect the power connector, transfer the bulbs to the replacement light, and refit it by following the reverse procedure.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Lights on a 2006 Citroen C3
How to Replace the Rear Lights on a 2006 Citroen C3
Citroen C3 (2002-2009 / FC, FN) Today, you will learn how to replace the rear lights on a 2006 Citroen C3 model I. To carry out the replacement of the lights, open the rear hatch an…
How to Replace the Rear Stop Bulb on a Citroen C3
How to Replace the Rear Stop Bulb on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) Before you can begin, open the rear hatch of the boot on your Citroen C3. Start by unscrewing and removing the screws that secure the rear light to t…
How to Remove the Rear Light from a Citroen C3
How to Remove the Rear Light from a Citroen C3
Citroen C3 (2002-2009 / FC, FN) In this video, we will see how to remove the rear light from a Citroen C3. Open the boot lid, and using a screwdriver, unscrew the fastening screws l…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos