Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb of the Citroën C1?

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Light bulb

To replace the front headlight bulb of the Citroën C1, lift the bonnet to access the rear of the headlight corresponding to the bulb to be replaced. This way, you can pull out the connector attached at the rear of the headlight and consequently remove the bulb inside. The bulb can then be replaced with a new one, which will be connected to the connector and inserted into its housing at the rear of the headlight. After inserting the new bulb, you can close the front bonnet.

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Citroen C1
How to Replace the Front Headlight Bulb on a Citroen C1
Citroen C1 (2005-2014 / MK 1) Replacing the front headlight bulb on a Citroen C1 is a straightforward task. To do this, you need to: - Open the bonnet; - Disconnect the connector;…
How to Replace the Front Headlight Bulb on a Citroën C1
How to Replace the Front Headlight Bulb on a Citroën C1
Citroen C1 (2005-2014 / MK 1) To replace the front headlight bulb on a Citroën C1, open the bonnet to access the components located inside the engine compartment: here you will fi…
How to replace the front headlight bulb of the Citroen C1
How to replace the front headlight bulb of the Citroen C1
Citroen C1 (2005-2014 / MK 1) The following video tutorial shows us how to replace the headlight bulb of the right front headlight of a Citroen C1 car, model produced from 2005 to…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos