Do it yourself
Frequently asked questions about cars and motorcycles

Windscreen Washer Pump Replacement

Model: Citroen Saxo MK 1 - Years 1996-2004
Part: Windshield wipers

To replace the windscreen washer pump, it is recommended to lift the vehicle on a ramp or suitable axle stands and remove the front right wheel, as the pump is located in the washer fluid reservoir, which is situated just below the wheel arch; once the wheel is removed, proceed to remove the wheel arch liner by taking out both the securing screws and the clips; then disconnect the power connector to the pump motor and the supply hose, and extract the pump from the reservoir, which is secured with an o-ring, and insert the new one.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen Saxo (1996-2004 / MK 1) In this tutorial, we can see how to replace the fuel pump in a Citroen Saxo, a very simple operation. First, remove the rear seat, then open the larg…
Citroen Saxo (1996-2004 / MK 1) Each fuse in the Citroën Saxo is located inside one of the dedicated fuse boxes installed in the vehicle: this type of vehicle has two fuse boxes. Th…
Citroen Saxo (1996-2004 / MK 1) In this video, we see small tips to fix five common issues that often occur on a Citroen Saxo by yourself: inside the cabin, the tube that carries wa…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos