Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump in a Citroen Saxo?

Model: Citroen Saxo MK 1 - Years 1996-2004
Part: Fuel pump

In this tutorial, we can see how to replace the fuel pump in a Citroen Saxo, a very simple operation. First, remove the rear seat, then open the large plastic cap using a flathead screwdriver. Once you have access to the pump, disconnect both the power connector and the hoses by unlocking their respective clips. At this point, using a flathead screwdriver again, unscrew the large outer ring, extract the pump, and install the replacement by following the exact reverse procedure.

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Citroën Saxo?
Where are the fuses located in the Citroën Saxo?
Citroen Saxo (1996-2004 / MK 1) Each fuse in the Citroën Saxo is located inside one of the dedicated fuse boxes installed in the vehicle: this type of vehicle has two fuse boxes. Th…
How to Change the Time on a Citroen Saxo
Citroen Saxo (1996-2004 / MK 1) If the clock on your Citroen Saxo displays the wrong time and you want to change it manually, follow these steps. Since it is an analogue mechanism, …
How to replace the front headlight bulb of the Citroen Saxo
How to replace the front headlight bulb of the Citroen Saxo
Citroen Saxo (1996-2004 / MK 1) If you own a Citroen Saxo and want to replace one of the headlight bulbs yourself, all you have to do is read the following guide and follow all the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos