Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Rear Light Bulb

Model: Citroen Saxo MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Light bulb

Video tutorial

To carry out this operation, open the rear hatch of the car and look behind the light fitting where there are washers to unscrew. Once identified, unscrew them; there should be two. Then, disconnect the light which is connected to a cable that, in turn, is attached to the unit containing the bulbs.

Disconnect the cable and, once you have identified the bulb to be replaced, unscrew it and proceed with its replacement by inserting a new bulb. Once done, reconnect the cable and attach the light by screwing the washers back in.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlight Bulbs on a Citroen Saxo
Replacing the Front Headlight Bulbs on a Citroen Saxo
Citroen Saxo (1996-2004 / MK 1) Want to replace the front headlight bulbs on a Citroen Saxo? Follow this guide in the video. Open the front bonnet by pulling the lever located at th…
Where is the fuse box of the Citroen Saxo located?
Where is the fuse box of the Citroen Saxo located?
Citroen Saxo (1996-2004 / MK 1) The Citroen Saxo has a fuse box inside it; specifically, the box is located inside the front hood. To access the box, we must pull the hood opening l…
Valve Stem Seal Replacement
Valve Stem Seal Replacement
Citroen Saxo (1996-2004 / MK 1) To keep your car in perfect working order, regular maintenance is essential. This includes the valve stem seals. With a bit of mechanical knowledge, …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos