Do it yourself
| ||||
|
Citroen C3 - Video tutorial
Model: Citroen C3
SC
- Years 2009-2016 When the AdBlue warning light on the Citroà «n C3 instrument panel lights up, it means that the additional fluid level inside its tank is low, or that there are problems with some sensors. In this case, the warning light will remain on on the instrument panel and a reset procedure will have to be performed. This is done by connecting a diagnostic tool to the vehicle's OBD port: this port is located in the part of the dashboard under the steering wheel. By following the instructions in the video, it will be possible to reset the light and consequently disconnect the scanner.
Posted on 3 September 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsReplace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.033
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |