Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the BSI Module in the Citroen C3?

Model: Citroen C3 SC - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Warning light – error code

See other generations:
Video tutorial

In this video, you can see how to reset the BSI module, a procedure applicable to both the Citroen C3 and other Citroen and Peugeot models of the same generation. This operation can be performed as a troubleshooting step for electronic malfunctions.

To proceed with the reset, insert the key and open the driver's door. Now, fully turn on the instrument panel and press both levers behind the steering wheel towards you for a few seconds.

If the car honks, it means the procedure was successful.


Updated on 13 June 2026 by ScegliAuto


Related tutorials

How do you reset the BSI unit of the Citroën C4?
How do you reset the BSI unit of the Citroën C4?
Citroen C3 (2002-2009 / FC, FN) It will be possible to reset the BSI unit of the Citroën C3 by connecting a diagnostic tool to the OBD port of the vehicle: this port is located on t…
How to Change the BSI of a Citroen C3
How to Change the BSI of a Citroen C3
Citroen C3 (2016-2023 / SY, SX) In this video, we see how to change the BSI of a Citroen C3: the BSI unit centralises and processes information from three networks: the CAN HS netwo…
How to Reset the BSI Unit on the Citroen C3
How to Reset the BSI Unit on the Citroen C3
Citroen C3 (2002-2009 / FC, FN) In this video, you will see how to reset the BSI warning light on the Citroen C3. Enter the vehicle (driver's side) and leave the door open, turn the…

Other guides you may be interested in

    Frequently Asked Questions

    • C3 2016-2023 - What does the MAX warning light on Citroen C3 indicate? Read answer
    • C3 2016-2023 - How to reset the car radio of the Citroen C3? Read answer
    • C3 2009-2016 - What does the SERV warning light indicate in the Citroen C3? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos