Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Citroen Jumper

Model: Citroen Jumper MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

In this new mini guide dedicated to your Citroen Jumper Mk2 (2006-2014), we will discover the various steps to manually reset the service light that appears on the instrument cluster. First, enter the vehicle, insert the key, and start the ignition.

Immediately locate the button situated below the fuel gauge and press it several times until the total mileage appears on the mini display. At this point, press and hold the same button for about 10 seconds.

Release it, and finally, press it again for another 10 seconds.


Updated on 13 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Citroën Jumper
How to Reset the Service Light on a Citroën Jumper
Citroen Jumper (2006-2014 / MK 2) To reset the Service light on a Citroën Jumper, turn on the ignition without starting the vehicle. Then, press the accelerator pedal and simultaneous…
How to Reset the Service Light on a Citroen Jumper III
How to Reset the Service Light on a Citroen Jumper III
Citroen Jumper (2014-2024 / MK 3) .. Let's see how to reset the service light on a Citroen Jumper Mk III. After completing the required services from.. …
How to Reset the Service Light on a Citroën Jumper
How to Reset the Service Light on a Citroën Jumper
Citroen Jumper (2014-2024 / MK 3) To reset the service light on a Citroën Jumper, turn on the instrument panel by turning the key to check that the light is on. Once confirmed, turn o…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos