Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on Citroen Jumper

Model: Citroen Jumper MK 1 - Years 1994-2006
Part: Warning light – error code

In this video tutorial, you can see how to reset the maintenance light by following a few simple steps and working independently. First, replace the engine oil and filters as outlined in the vehicle's user and maintenance manual from the manufacturer. Get in the vehicle, insert the key, and turn on the instrument panel. Now, you will see a spanner icon and day 0 on the display; press the button located below the speedometer on the right until you see the total mileage. At this point, press and hold the button until you see the text "CFG"; now press three times (CFG 3) AND THEN HOLD THE BUTTON UNTIL COMPLETELY RESET. Turn off and then turn on the panel to check that the spanner icon on the display has disappeared.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the service light on the Citroen Jumper.
Resetting the service light on the Citroen Jumper.
Citroen Jumper (2006-2014 / MK 2) The following information will show us the procedure to reset the maintenance service light for the engine oil change of the Citroen Jumper, as well …
How to Reset the Service Light on a Citroën Jumper
How to Reset the Service Light on a Citroën Jumper
Citroen Jumper (2006-2014 / MK 2) To reset the Service light on a Citroën Jumper, turn on the ignition without starting the vehicle. Then, press the accelerator pedal and simultaneous…
How to reset the service light on the Citroen Jumper
How to reset the service light on the Citroen Jumper
Citroen Jumper (2006-2014 / MK 2) The steps to reset the service light on a Citroen Jumper vehicle produced from 2006 to 2014 are very similar to those previously explained for Ford F…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos