Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. C5
  6. : How to remove the front bumper of the Citroen C5

Citroen C5 - Video tutorial

Model: Citroen C5 DC, MK 1 - Years 2000-2008
Part: Front bumper
Operation: How to remove the front bumper of the Citroen C5

In today's video we see how to remove the front bumper of the Citroen C5. First let's equip ourselves with the appropriate tools, as shown in the video. Once this is done we can proceed with the operation. We open the front hood by pulling the lever located inside the car. At this point we start by removing the upper fixing screws, then proceeding with the same positioned at the bottom. Once the screws and the cover have been removed, it is possible to pull the bumper away from its seat and then proceed to release the unit in question. We can therefore say that the current work is complete.


Posted on 4 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos