Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Spark Plugs on a 2007 Citroen C3 1.4 Petrol

Model: Citroen C3 FC, FN - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Spark plugs

See other generations:
Video tutorial

In this video tutorial, you can see how to replace the spark plugs on a 2007 Citroen C3 1.4 Petrol: first, get into the vehicle, turn off the engine, and pull the handbrake; lift the bonnet and secure it with the prop rod. Disconnect all various connectors, then disconnect the electrical supply to the coil; to do this, lift the support tab of the connector, then pull up the terminal and remove the intake duct, pushing on the yellow part of each clip by hand.

Use a flat screwdriver to disconnect the power terminal.

Disconnect the electrical terminal of the pressure sensor by lifting the support tab of the connector. Remove the wiring harness.

Use a 10 mm socket to remove the coil mounting nuts, then grasp the coil and gently pull it upwards to extract it. Use a vacuum cleaner to clean around the spark plug housing. Use a 16 mm socket with an extension to unscrew the spark plugs.

Use a vacuum cleaner to clean around the spark plug housing. Once all the spark plugs are removed, install the new spark plugs, tightening them fully but without overdoing it. Refit all parts in reverse order.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

Citroen C3 (2009-2016 / SC) In this video, you will learn how to remove and replace the spark plugs in a Citroen C3 (the procedure is similar for other Citroen and Peugeot model…
Citroen C3 (2002-2009 / FC, FN) Replace the damaged spark plugs on a Citroen C3. First, lift the bonnet, then locate the bar where the coils are situated. Disconnect the coils from …
Citroen C3 (2002-2009 / FC, FN) Replacing the fuel filter on a Citroen C3? Let's remove the filter from under the vehicle. Lift the car on a column lift and locate the fuel filter. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos